740gsm PVC

Our top-of-the-range material for use on double-sided banners

Material Overview

Light-stop lining to prevent show-through from the reverse
High-quality full-colour print
Standard finishing included
Printed with fade-proof UV-based inks
M1/B1 fire-rated material to comply with UK and European Fire Safety Standards

Each banner is printed and finished to your requirements.

Our premium 740gsm banner material is probably the best quality material on the market. It has two layers of PVC with a light-stop material in between. This prevents any show-through from the reverse side so is the perfect solution for double-sided banners.

The material can also be used for single-sided banners, giving them a supreme quality feel and extra strength. This material really is 'premium'.

Uses for 740gsm Double-Sided PVC

Double-sided banners (Lamp post banners etc.)
Cafe banners

740gsm PVC Material Image — Material in use

Finishes for 740gsm PVC

Welded Hems Only
Items will be given a 53mm welded hem.
Pole Pocket(s)
A pocket is added to the edges you require to allow a pole to pass through and support/tension the banner.
The diameter of the pocket can be specified by you, however, if you let us know the diameter of the object to go into the pole pocket we can calculate the size of the pocket for you.
Trimmed to Size
Items will be cut to the size ordered.
Trimmed With Eyelets
Same as Trimmed to Size but with the addition of eyelets.
Trimmed with Overlap
Items will be supplied with an amount of overlap on the edges you require. Once positioned, the overlap can be trimmed with a double-cut.
If not specified, our standard is 10mm overlap on right edges. Please let us know if you require anything different.
Trimmed with Silicone Edging (Kedar)
Graphics will be stitched to a strip of silicone edging, suitable for exhibition tension frames.
14mm wide silicone will be used as standard, unless otherwise requested.
There is no charge for this finish.